Product Overview
The HySafety® 7858LC Structural Firefighting Glove is a fully certified, high-performance protective solution engineered for firefighters who operate in the most demanding thermal and mechanical environments. Certified to EN 659:2003+A1:2008 AC:2009 and EN 388 (3X43F), this glove delivers verified protection against heat, flame, abrasion, cuts, and tears—making it a versatile choice for structural firefighting, rescue, and industrial fire operations.
What sets the 7858LC apart is its intelligent material combination: a breathable aramid fabric backhand paired with a high-abrasion aramid silicon-coated palm, reinforced by a Kevlar® steel knit liner and a flame-retardant moisture barrier. The result is a glove that protects against multiple hazards while maintaining the dexterity and comfort firefighters need to perform at their best.
For distributors serving municipal, industrial, and volunteer fire departments, the 7858LC offers a certified, feature-rich product that competes strongly in both European and North American markets—backed by HySafety®'s commitment to quality and reliable supply.
Key Features & Technical Advantages
Certified Thermal Performance
The 7858LC has been independently tested to verify performance across all critical thermal metrics:
| Key Test Items |
Requirement |
Test Result |
| CONVECTIVE HEAT (INDEX HTI, sec) |
≥ 13 |
P-29 / B-25 |
| RADIANT HEAT RESISTANCE (T24, sec) |
≥ 20 |
35 |
| CONTACT HEAT (sec) |
≥ 10 |
12 – 21 |
These results demonstrate strong performance across all three heat transfer modes—convective, radiant, and contact—providing firefighters with reliable protection in extreme thermal conditions.
Advanced Material Construction
- Palm: Aramid silicon coating—high abrasion resistance and heat resistance, with superior grip in wet, dry, or oily conditions.
- Backhand: Aramid fabric—heat resistant and breathable, allowing heat and moisture to escape for greater comfort.
- Moisture Barrier: Flame-retardant, durable, and breathable membrane that prevents penetration by chemicals and bloodborne pathogens.
- Thermal Liner: Kevlar® steel knit—heat and cut resistant, breathable, with Kevlar® stitches throughout for structural integrity.
Designed for Fireground Practicality
- Long Cuff with Fastener: Extended forearm protection with an adjustable closure for a secure, personalized fit that prevents debris ingress.
- Reflective Strap on Top Hand: High-visibility yellow reflective strap enhances low-light identification and fireground safety.
- D-Ring and Carabiner: Integrated attachment points allow firefighters to clip gloves to turnout gear for quick access and reduced loss.
- Full Size Range: Available in sizes 6 through 12 to accommodate all hand sizes.
Certified to EN 659 and EN 388
The 7858LC meets the rigorous European standards for structural firefighting gloves (EN 659) and mechanical protection (EN 388, achieving a 3X43F rating). This dual certification makes it a strong choice for departments seeking verified, internationally recognized protection.
PFAS-Conscious Manufacturing
We recognize the growing focus on chemical safety in firefighting PPE. The 7858LC is manufactured with materials that align with evolving environmental and health standards.
Why Distributors Choose HySafety®
Dual Certification = Broader Market Appeal
The 7858LC's EN 659 and EN 388 certifications open doors to both European and international markets. For North American distributors, this provides a competitive edge when supplying departments that recognize or require EN-certified equipment, as well as industrial clients with European safety protocols.
Premium Materials from Trusted Global Sources
By combining aramid fabric, aramid silicon coating, and Kevlar® steel knit construction, the 7858LC offers a level of material quality that competitors struggle to match. These are proven technologies that fire departments recognize and trust.
Breathability and Comfort
The aramid fabric backhand is heat resistant and breathable, addressing a common complaint about fire gloves—heat and moisture buildup. Firefighters who wear the 7858LC experience less sweat accumulation and greater comfort during extended operations.
D-Ring and Carabiner Convenience
The integrated D-ring and carabiner are practical features that firefighters appreciate. They allow gloves to be securely clipped to turnout gear when not in use, ensuring quick access and preventing loss on the fireground—a small detail that makes a big difference in daily use.
Reliable Supply Chain Partnership
As a subsidiary of Shanghai Hygloves Co., Ltd., HySafety® operates with scalable manufacturing capacity. We understand the critical importance of inventory availability for distributors. With the 7858LC, you gain a partner committed to consistent quality, transparent communication, and on-time delivery.
Technical Specifications
Test Results
| Key Test Items |
Requirement |
Test Result |
| CONVECTIVE HEAT (INDEX HTI, sec) |
≥ 13 |
P-29 / B-25 |
| RADIANT HEAT RESISTANCE (T24, sec) |
≥ 20 |
35 |
| CONTACT HEAT (sec) |
≥ 10 |
12 – 21 |
Material Composition
| Layer |
Material |
Key Properties |
| Palm |
Aramid silicon coating |
High abrasion & heat resistance, superior grip |
| Backhand |
Aramid fabric |
Heat resistant, breathable |
| Moisture Barrier |
Flame-retardant membrane |
Chemical/bloodborne pathogen barrier, breathable |
| Thermal Liner |
Kevlar® steel knit |
Heat & cut resistant, breathable |
| Stitching |
Kevlar® thread |
High tensile strength, heat resistance |
| Cuff |
Long cuff with fastener |
Secure fit, extended forearm protection |
| Visibility |
Reflective strap |
Low-light identification |
| Attachment |
D-ring & carabiner |
Convenient gear clipping |
Certifications
| Standard |
Rating |
| EN 659:2003+A1:2008 AC:2009 |
Structural Firefighting Glove |
| EN 388 |
3X43F (Abrasion, Cut, Tear, Puncture) |
Size Availability
Frequently Asked Questions (FAQ)
Q: Is the 7858LC certified?
A: Yes. The 7858LC is certified to EN 659:2003+A1:2008 AC:2009 (structural firefighting gloves) and EN 388 with a 3X43F rating (mechanical protection). Test reports are available upon request.
Q: Does the 7858LC meet NFPA 1970?
A: The 7858LC is designed and certified to European standards. For North American departments requiring NFPA 1970 compliance, please contact our sales team to discuss suitable HySafety® models.
Q: What is the purpose of the D-ring and carabiner?
A: The D-ring and carabiner allow firefighters to clip the gloves to their turnout gear when not in use. This ensures quick access and prevents gloves from being lost on the fireground.
Q: What is the reflective strap for?
A: The yellow reflective strap on the top hand enhances visibility in low-light, smoky, or nighttime conditions, improving firefighter safety and accountability.
Q: Can the gloves be washed?
A: Yes. The 7858LC is designed to withstand multiple wash cycles while maintaining its protective properties. Follow standard fire gear laundering protocols for best results.
Q: What is the PFAS concentration in these gloves?
A: The 7858LC is manufactured with PFAS-conscious materials. For specific PFAS data and documentation, please contact our sales team.
Q: How do I determine the correct size?
A: The 7858LC is available in sizes 6 through 12. Please refer to our detailed size chart for precise measurements.
Q: What is the typical lead time for distributor orders?
A: As a direct manufacturer with substantial production capacity, we maintain raw material inventory to support rapid turnaround. Typical lead times range from 60 to 90 days depending on order volume. Contact us for a customized production schedule.
Q: Are Kevlar® and DuPont™ genuine materials?
A: Yes. Kevlar® and DuPont™ are registered trademarks of E.I. du Pont de Nemours and Company. We source authentic materials to ensure every glove delivers the performance and reliability firefighters depend on.
Q: Do you offer samples for evaluation?
A: Yes. We encourage distributors to request samples for hands-on evaluation. Contact our sales team to arrange a sample order.
Equip with Certified Confidence
The HySafety® 7858LC Structural Firefighting Glove combines EN 659 certification, aramid silicon grip, breathable aramid construction, and practical fireground features like the D-ring and reflective strap. By choosing the 7858LC, you offer your customers a certified, feature-rich product that delivers safety, comfort, and long-term value.
Partner with HySafety®. Protect the Protectors.
*For samples, technical data sheets, or a wholesale quotation, contact our distributor sales team today.*
Your message must be between 20-3,000 characters!
